Watch model and color identification
CMF watches identify their product model and factory color in Bluetooth advertisements. Nothing X combines these values into a catalog key to select the corresponding product artwork. A factory color identifies a product variant; it does not describe replacement straps or bezels.
Product identifiers
Section titled “Product identifiers”A product ID contains four bytes. Its catalog representation is eight hexadecimal digits in the same byte order, with leading zeroes preserved.
| Product ID | Watch |
|---|---|
82D5BB72 |
Watch Pro |
34F72851 |
Watch Pro 2 |
335BBD62 |
Watch 3 Pro |
The factory color is a separate byte, represented by two hexadecimal digits.
The catalog key is the product ID followed by the color code. For example,
335BBD62 and 23 form 335BBD6223, an orange Watch 3 Pro entry.
The catalog calls this combined key fastPairId; it is a product/SKU identifier,
not a unique identifier for an individual watch.
The artwork reference lists the known color codes. Several codes can share the same image. Their individual regional or retail meanings have not been established.
Advertisement normalization
Section titled “Advertisement normalization”The field offsets below refer to the byte sequence reconstructed by Nothing X’s watch parser, not the complete Bluetooth advertising packet.
Android and Web Bluetooth expose manufacturer-specific data with the two-byte company identifier separated from its payload. In Nothing X 3.10.0:
- Company ID
0x0CCB(3275 decimal) uses the supplied payload unchanged. - For other company IDs passed to the watch parser,
2C BEis prepended to the supplied payload before the fields are read.
This second rule describes the parser’s normalization branch; it does not mean that arbitrary manufacturers identify CMF watches. The parser also checks the watch marker and validates the embedded address through its vendor-address check.
Advertisement layouts
Section titled “Advertisement layouts”Nothing X uses a legacy layout for normalized data of at least 18 bytes, and a compact layout for 14-17 bytes. Shorter data does not contain the complete fields.
| Field | Legacy layout | Compact layout |
|---|---|---|
| Embedded Bluetooth address | Bytes 0-5 | Bytes 0-5 |
| Watch marker | Bytes 6-11: JX-IWD |
Bytes 6-7: JX |
| Product ID | Bytes 12-15 | Bytes 8-11 |
| Factory color code | Byte 16 | Byte 12 |
| State | Byte 17 | Byte 13 |
The address bytes are formatted in their existing order. The product and color
bytes are converted to uppercase hexadecimal without reversing them.
Nothing X exposes them as PRODUCT_ID, COLOR_ID and the combined
PRODUCT_COLOR_ID / FAST_PAIRED_ID.
The parser sets IS_PAIRED for state bytes 00, 01 or 02. This is the app’s
interpretation of an advertising state; it does not establish an authenticated
GATT session. Advertised identity is not proof of device ownership.
QR and shell identifiers
Section titled “QR and shell identifiers”The stock onboarding QR uses product field P and color field C. The QR color
is decimal, whereas the catalog uses hexadecimal. For example, decimal 35
corresponds to catalog color 23. Comparing the strings without this conversion
can select the wrong SKU.
Watch Pro 2 and Watch 3 Pro firmware analysis identifies the APP_PID property and
the read-only AT GETPID query. Its response format is:
GETPID:34F72851,OKThis query reports the product ID only. It does not report the factory color. Shell-service availability and command support depend on the firmware; the query is separate from the encrypted control-channel authentication protocol. A shell reply may arrive over several Bluetooth notifications.
Browser access
Section titled “Browser access”Web Bluetooth distinguishes access to GATT services from access to advertisements.
A successful connection alone does not provide the manufacturer-data color byte.
Where supported, BluetoothDevice.watchAdvertisements() delivers advertisements
for an authorized device. API support, permissions and the watch’s advertising
state determine whether those bytes are available.
A missing advertisement or unknown color code leaves the factory color unknown. An advertised device name can help identify a model, but does not establish a factory color. A user-selected frame is a display preference, not detected hardware metadata or evidence that a firmware package is compatible.
See the Web Bluetooth specification and BluetoothDevice API reference for the browser interfaces and availability.
Evidence and scope
Section titled “Evidence and scope”The advertisement layouts and state handling come from Nothing X 3.10.0’s
com.nothing.link.bluetooth.sdk.scan.parser.NothingWatchParser, including
getTotalManufacture() and parser(). NtBlePlugin consumes the resulting
PRODUCT_ID and COLOR_ID; Flutter’s
BluetoothHelper.getDeviceInfoByBluetoothDevice resolves them against the
DeviceInfoTable SKU catalog.
The QR and APP_PID findings come from stock Watch Pro 2 and Watch 3 Pro firmware
analysis. The artwork associations come from the Nothing X product catalog and
its recorded image URLs. These findings establish the documented formats and
known catalog mappings, not universal advertisement or shell-command availability
across every firmware and browser.