Skip to content

Use the browser emulator

The browser emulator runs a virtual watch. Its controls and uploaded files change that virtual watch, not a physical watch nearby. Stock firmware and the files needed for the first boot are included.

  1. Open Watch Pro 2 or Watch 3 Pro in a recent desktop Chrome or Edge.
  2. Wait for the initial download and startup. Watch log shows progress. The stock watch face should appear without pairing with Nothing X.
  3. Click and drag on the display to tap and swipe. Use the round crown control for a press and the adjacent scroll control for rotation.

The model name above the watch switches to the other model’s page. Choose the model your files were made for. If startup fails, follow browser troubleshooting.

Simulation → Config separates three kinds of local storage:

  • Cache downloads keeps downloaded firmware, app packages, watch faces and emulator files for reuse. It is enabled by default. Clearing the download cache does not erase saved watch data. The cache is limited to 256 MB; older entries are removed as needed.
  • Remember settings retains simulation controls, sound and appearance choices separately for each watch model. It is enabled by default. Uploaded files must be selected again.
  • Automatically save watch storage preserves the virtual watch’s NOR and NAND flash, including settings, installed apps and history that its firmware has written. It is enabled by default and can be turned off. Saves are separated by model and the contents of the selected firmware, resources and apps; a different selection starts with its own storage.

With automatic saving enabled, the emulator saves once stock is ready, after interactions settle and every 15 seconds while visible. It also attempts a save when the page becomes hidden, and finishes a save before Stop, model changes and firmware switches. Reopening the same firmware restores its saved storage automatically. Save now is an optional shortcut.

The save status shows when the latest checkpoint finished. An abrupt tab closure, browser crash or power loss can interrupt a pending save; changes since the last completed checkpoint may be lost. This is a flash checkpoint, not a suspended CPU session: the watch boots again when reopened, and changes the firmware has not written to flash are not included.

Cached files avoid repeat downloads. They do not eliminate firmware boot time, decompression or emulator startup. Switching models does not copy one model’s saved storage to the other. A share link contains selections, not your saved watch data or local uploads.

Protect saved data asks your browser to keep this site’s saves and downloads when disk space runs low. The browser may decline. Clearing site data still removes the files, even if the browser granted protection.

Clear saved data has separate controls for downloaded files, remembered controls and all saved watch storage for the current model. Clearing saved watch storage does not interrupt the running watch; restart it to use fresh storage. Hard reset to stock discards the current saved state and starts a fresh stock watch.

The battery slider sets the percentage reported by supported stock firmware. This is a testing override, not a battery-discharge model. Custom firmware uses the simulated voltage and its own battery driver instead.

Under Optical sensors, Set measurement results supplies the chosen heart-rate and blood-oxygen values directly. On Watch 3 Pro, turn on Simulate optical sensor signals and Watch is worn to send a repeating test pulse to the stock sensor driver. Open Heart rate or Blood oxygen on the watch and let the firmware calculate the result. Turn off signal simulation to enter exact values again.

Under Simulation → Orientation, drag the small watch model or focus it and use the arrow keys. Its tilt sets the gravity readings supplied to the watch.

On Watch 3 Pro, Follow model movement also produces gyroscope readings while the model rotates. These readings describe rotation speed in degrees per second, not the angle of the watch. They return to zero when movement stops, even if the watch remains tilted. Disable this option to enter constant X, Y and Z rotation rates for a sensor test. The model gesture controls tilt; manual Z input also allows tests of rotation around the face’s perpendicular axis.

A watch face changes the clock screen. It is different from a firmware package, which contains application code and possibly resources.

  1. Open FMC watch faces. FMC is the community watch-face catalog.
  2. Search by name or author, or change the sort order.
  3. Select a face and choose Apply watch face. The virtual watch restarts to load it; this restart is expected.
  4. Check the selected face after startup. If the previous face is still selected, hold the watch display to open the stock face picker and inspect its choices.

For a downloaded face, choose the file under Watch face, then use Apply and restart (or Boot selection if the watch has not started). Use a face intended for the selected model. A successful preview does not guarantee installation on hardware.

First read the download’s description. The .bin extension alone does not tell you what a file contains. If the author does not identify its model and file type, ask before choosing an input.

Download Input to use
AOTA firmware/update package Firmware package
Raw application, usually app.bin Raw application files → Application image
Companion resources, usually sdfs.bin Raw application files → Application resources, alongside its matching app
Watch face (.wfdl, .wfc, or a face distributed as .bin) Watch face
Prepared virtual NAND storage Advanced boot files → Virtual NAND, only when the build’s instructions require it
  1. Select Custom firmware under Boot preset.
  2. Choose either the package or the raw application files. Clear selections from a previous experiment using the file input’s remove control.
  3. Keep bundled base files unless the build instructions explicitly require replacements. A normal custom-app preview does not require you to upload every file in Advanced boot files.
  4. Choose Apply and restart, or Boot selection if the watch has not started. Check for the application’s expected screen and inspect Watch log if it fails to start.

Use application resources from the same build when supplied. An application may start but display missing or broken graphics if its resources do not match. For Watch Pro 2, the Bad Apple preset provides a ready-made example without building or downloading it yourself.

This workflow loads the selected application into virtual storage and boots it. It does not test Bluetooth transfer or the update installer. Use desktop OTA testing for those stages.

The FMC app store also distributes .wp2app packages. These are different from a raw app.bin or an AOTA firmware update. They need the matching patched Watch Pro 2 firmware and App Loader. Do not put them in Application image or Firmware package.

  1. Select Apps firmware under Boot preset.
  2. The compatible patched firmware and App Loader are selected automatically. Their names and versions appear above the app list.
  3. Choose an app from FMC apps and click Add selected app, or select one or more local .wp2app files under Add apps. Up to eight apps fit in the loader’s slots. Each selected file has a Remove control.
  4. Choose Apply and restart, or Boot selection if the watch has not started. The browser downloads the firmware and loader, checks the packages, and installs them into virtual storage before booting.
  5. Open Apps in the watch’s menu and select an installed app.

The browser prepares the virtual storage automatically. With automatic saving enabled, reopening the same firmware, loader and app selection restores the last saved storage. Catalog apps can be reselected from the session URL. Apply and restart keeps selected local files through that restart using temporary browser storage. An ordinary reload or a new tab still requires selecting local uploads again.

This profile currently supports Watch Pro 2. Watch 3 Pro shows an unavailable message because no compatible patched firmware and loader are configured. The CMF Watch SDK describes app development. The community apps repository contains sources and publishing instructions.

Opening a configured link starts the watch with those selections. Boot inputs are temporarily locked while loading, then become editable. Change the files or app list and choose Apply and restart to use the new selection.

Catalog selections update the page URL. Share session copies a link to the selected firmware, loader, apps and watch face. Local uploads cannot be included; recipients must select those files themselves. The link recreates the boot configuration, not the running watch’s memory or saved settings.

The firmware catalog remains available while emulation runs. Use selected firmware restarts the virtual watch when necessary to apply the selection.

Append FMC record IDs to the model page’s URL:

Parameter Selection
watchface=<id> A watch face for that model
firmware=<id> One firmware catalog record
loader=<id> One compatible App Loader record
app=<id> An app; repeat this parameter for multiple apps

For example, /emulator/watch-pro-2/?app=pyccglfsfijw463 loads Orbit and selects the compatible firmware and loader automatically. Add &app=m00yj6hopd9a0zs to include Sky Hop. Selections appear in the corresponding controls before startup. An explicit firmware or loader replaces that automatic selection and must be compatible with the apps.

IDs refer to catalog records, not immutable releases: the files behind a record can change when its author updates it. Invalid IDs, incompatible models and unsupported combinations produce an error rather than silently booting stock. Firmware packages with resources that differ from the bundled base require matching virtual storage; selecting a catalog entry does not make every firmware version compatible. Hard reset to stock clears URL selections as well.

Save Watch log before discarding a failed experiment. Hard reset to stock returns the virtual watch to the bundled starting state; it can discard virtual settings and installed content. It does not restore a physical watch.

For a screenshot, use the camera control. Include frame in screenshots under Simulation → Display controls whether the case appears in the image.